printable version
Wiper switch and windshield washer
| Fig. 1.38. The three-position switch wiper and windshield washer
|
The switch has three positions: - Intermittent; - slow moving; - Rapid movement.
NOTE To prevent damage to the windshield wipers do not try to clean up their heavy precipitation in the form of snow or ice. The accumulated snow or ice must be cleaned manually. If there is only a small layer of snow or ice, turn on the heater in the heating mode of the windscreen and melt snow or ice before using the wipers. |
Job Windshield Washer
Washer fluid is applied to the windshield when the lever switch wiper / washer towards the steering wheel. When the windshield washer simultaneously with the cleaning liquid wipers automatically will make two moves. Washer stops working when the switch wiper / windshield washer is released.
NOTE Do not operate the washer for more than 15 seconds, or when the washer reservoir is empty. In cold weather before using the wiper, make sure the wiper blades are not frozen to the glass. In areas where water freezes in winter, use antifreeze fluid for washing the windshield. |
Demisting the windscreen
| Fig. 1.40. Mode switching demisting the windscreen
|
For demisting the windscreen (single windscreen wiper), press the switch wiper / windshield washer upward.
Wiper with variable interval mode wiper (optional)
To use the mode of operation of the wiper blades with a variable interval, move the wiper switch to the position ?�INT?� (?�Intermittent?�). In this position, the switch interval intermittent operation of the wiper blades can be changed from about 1 to 18 by turning the adjusting wheel on the interval of the intermittent mode selector lever.
|