REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Santa FE (2006 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Santa FE
		Operation and maintenance of car
		Engine
			Maintenance (engines 2,0 / 2,4 l)
			Mechanical (engines of 2.0 / 2.4 L).
			Cooling system (engines 2,0 / 2,4 l)
			Intake and exhaust systems (engines 2,0 / 2,4 l)
			Maintenance (2.7 liter engine)
				Check engine oil level
				Replacing the engine oil
				The choice of the oil filter
				Changing the oil filter
				Checking the tightness of the cooling system
				Check valves radiator cap
				Check the antifreeze concentration
				Compression Test
				Tightening the cylinder head
				Adjustment of backlashes of valves
				The ancillary drive belts and tensioner
			Mechanical (engine displacement of 2.7 liters.)
			Cooling system (engines of 2.7 liters)
			Lubrication System (engines of 2.7 liters)
			Emission
			Fuel system
			Tables
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body
		diagrams

printable version

Check engine oil level

Place the vehicle on level ground.

Warm up the engine.

NOTE

If the car has long been in the parking lot, warm up the engine for about 20 minutes.

Stop the engine, wait 2-3 minutes and then check the engine oil level.

Fig. 2.193. Dipstick

Check the engine oil level range, indicated on the dipstick engine. If the oil level reaches the minimum value (mark ?�L?�) or below it, add oil to the mark ?�F?� (Fig. 2.193).

NOTE

For filling, use the engine oil of a type identical to the type of oil poured into the engine.

Check for the absence of contamination of engine oil or coolant and impurities in the fuel oil. Make sure the engine oil has an appropriate viscosity.

« previos page
Maintenance (2.7 liter engine)

next page »
Replacing the engine oil