add to favorites

REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Santa FE (2006 release)

general info. full specifications. diagnostics. hints. tips. tricks

Hyundai Santa FE

Home

Hyundai
	Santa FE
		Operation and maintenance of car
		Engine
			Maintenance (engines 2,0 / 2,4 l)
			Mechanical (engines of 2.0 / 2.4 L).
			Cooling system (engines 2,0 / 2,4 l)
			Intake and exhaust systems (engines 2,0 / 2,4 l)
			Maintenance (2.7 liter engine)
			Mechanical (engine displacement of 2.7 liters.)
			Cooling system (engines of 2.7 liters)
			Lubrication System (engines of 2.7 liters)
			Emission
			Fuel system
			Tables
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body
		diagrams

Hit Counter by Digits

printable version

Engine

Maintenance (engines 2,0 / 2,4 l)

Check engine oil level

Replacing the engine oil

The choice of the oil filter

Changing the oil filter

Checking the tightness of the cooling system

Check valves radiator cap

Check the antifreeze concentration

Compression Test

Adjusting the tension of the ancillary drive belt

Belt tensioner mounted units

Adjusting the alternator drive belt

Adjusting the drive belt power steering pump and the air conditioner

Mechanical (engines of 2.0 / 2.4 L).

Removal, check and installation of the valve timing

Dismantling, check and assemblage of camshafts and pushers

Remove the support of the power unit

Removing and installing engine and gearbox assembly

The housing of the oil pump, the oil pump and balance shafts

Dismantling, check and assemblage of the cylinder head

Disassembly and assembly of connecting rod and piston group

Cooling system (engines 2,0 / 2,4 l)

Tubes and pipes, redundant system cooling

Removing and installing coolant temperature sensor

Removal, check and installation of the water pump (engine DOHC)

Removal, check and installation of the radiator

Removal, check and installation of the electric motor radiator fan

Check the radiator cap

Removal, check and thermostat installation

Intake and exhaust systems (engines 2,0 / 2,4 l)

Removal, check and installation of the exhaust manifold and the exhaust system

Removal, check and installation of an inlet collector

Removing the silencer

Removal, check and installation of a reception pipe of the exhaust system (with converter)

Removal, check and installation of the air filter

Maintenance (2.7 liter engine)

Check engine oil level

Replacing the engine oil

The choice of the oil filter

Changing the oil filter

Checking the tightness of the cooling system

Check valves radiator cap

Check the antifreeze concentration

Compression Test

Tightening the cylinder head

Adjustment of backlashes of valves

The ancillary drive belts and tensioner

Mechanical (engine displacement of 2.7 liters.)

Removal, check and installation of the timing belt

Dismantling, check and assemblage of the block of cylinders

Remove the support of the power unit

Removing the engine and gearbox assembly

Dismantling, check and assemblage of the camshafts

Removal and repair of cylinder head

Disassembly of connecting rod and piston group

Dismantling, check and assemblage of the crankshaft

Cooling system (engines of 2.7 liters)

Tubes and pipes, redundant system cooling

Removing and installing coolant temperature sensor

Removal, check and installation of the water pump (engine V6)

Removal, check and installation of the radiator

Removal, check and installation of the electric motor radiator fan

Check the radiator cap

Removal, check and thermostat installation

Lubrication System (engines of 2.7 liters)

Removal, check and installation of the oil pump and oil pan

Removal, check and installation of the exhaust manifold and the exhaust system

Removal, check and installation of an inlet collector

Removing the silencer

Removal, check and installation of a reception pipe of the exhaust system (with converter)

Removal, check and installation of the air filter

Removal, check and installation of the valve PCV

The system EVAP

The system of emission control (models with catalytic converter)

The control system composition of the fuel-air mixture (fuel injection system MFI)

Distributed fuel injection

Troubleshooting control fuel injection

The control system distributed injection of fuel

Fuel delivery system

Removal, check and installation oplivoprovodov lines and drain the fuel vapor

Troubleshooting on diagnostic codes

Table 2.1. Specifications, engines of 2.0 / 2.4 L

Table 2.2. Tightening torques, motors of 2.0 / 2.4 L

Table 2.3. Troubleshoot problems and their solutions

Table 2.4. The relationship between the density of the coolant and the concentration of ethylene glycol

Table 2.5. The nominal values for adjustment of the ancillary drive belt

Table 2.6. Repair size holes for the valve seats

Table 2.7. Repair size valve guides

Table 2.8. Fan Relay Circuit Check

Table 2.9. Specifications dvigatelyaobemom 2.7 l

Table 2.10. Fastener Tightening engine capacity of 2.7 liters

Table 2.11. Troubleshoot problems and their solutions

Table 2.12. The relationship between the density of the coolant and the concentration of ethylene glycol

Table 2.13. Troubleshooting lash

Table 2.14. Repair size valve guides

Table 2.15. Repair size holes for the valve seats

Table 2.16. Fan Relay Circuit Check

Table 2.17. Specifications EMISSION

Table 2.18. The data for adjustments and control

Table 2.19. Fastener Tightening

Table 2.20. Troubleshoot problems and their solutions

Table 2.21. Technical characteristics of the fuel system

Table 2.22. Basic data for the adjustment and control

Table 2.23. Fastener Tightening

Table 2.24. Troubleshoot problems and their solutions

Table 2.25. Fuel tank and fuel lines

Table 2.26. Checks diagnostic codes (fault codes) (for vehicles with an engine 2,4 I4-EOBD)

Table 2.27. Checks diagnostic codes (fault codes) (for vehicles with an engine 2,4 I4-without EOBD)

Table 2.28. Checks diagnostic codes (fault codes) (for vehicles with an engine 2,7 V6- with EOBD)

Table 2.29. Checks diagnostic codes (fault codes) (for vehicles with an engine 2,7 V6-without EOBD)

Table 2.30. Problems with diagnostic codes (DTC) (for vehicles with engines of 2.4 liters and I4)

Table 2.31. Problems with diagnostic codes (DTC) (for vehicles with engines of 2.7 liter and V6)

Table 2.31. Problems with diagnostic codes (DTC) (for vehicles with engines of 2.7 liter and V6) (Continued)

Table 2.32. Check with a tester HI-SCAN (PRO)

Table 2.33. Check with a voltmeter

Table 2.34. Checks the air flow sensor (MAF) and the air temperature sensor in the intake manifold (IAT)

Table 2.35. Component scans the air flow sensor (MAF 2.7 V6)

Table 2.36. Check with a tester HI-SCAN (PRO)

Table 2.37. Check with a multimeter

Table 2.38. Check with a tester HI-SCAN (PRO)

Table 2.39. Check with a tester HI-SCAN (PRO)

Table 2.40. Checks the oxygen sensor heater

Table 2.41. The output voltage of the oxygen sensor heater

Table 2.42. When using the diagnostic tool such as GTS

Table 2.43. The output voltage of the oxygen sensor

Table 2.44 If you use the diagnostic tool such as GST

Table 2.45. Check with a tester HI-SCAN (PRO)

Table 2.46. Checks the work of the injectors

Table 2.47. Check with a tester HI-SCAN (PRO)

Table 2.48. Checks the work of the injectors

Table 2.49. Checking adsorber tester HI-SCAN (PRO)

Table 2.50. Check sensor tester HI-SCAN (PRO)

Table 2.51. Terms of fuel pressure test

Table 2.52. System status, possible causes and remedies

Table 2.53. Diagnostics options

Table 2.54. A Guide to Troubleshooting

Table 2.55. Parameter diagnostics

Table 2.56. A Guide to Troubleshooting

Table 2.57. Parameter diagnostics

Table 2.58. A Guide to Troubleshooting

Table 2.59. Parameter diagnostics

Table 2.60. A Guide to Troubleshooting

Table 2.61. Parameter diagnostics

Table 2.62. A Guide to Troubleshooting

Table 2.63. Parameter diagnostics

Table 2.64. A Guide to Troubleshooting

Table 2.65. Parameter diagnostics

Table 2.66. A Guide to Troubleshooting

« previos page
Table 1.6. The recommended tire pressures

next page »
Maintenance (engines 2,0 / 2,4 l)

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.