add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Sonata (2001 release)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Sonata
Home
 
Hyundai
Sonata
General Information
Engine
Transmission
Steering
Chassis
Brakes
Body
Technical data
Check fault
Overview
Care body
Repair small damages of a body
Corrosion and car wash
Exterior body parts
Elements of interior
The center console
Dashboard
Interior trim
Front seat
Backseat
Seat belts
Windshield
Rear window
Additional security
Systems of heating, ventilation and air conditioning, air-
Electrical
Diagrams
 


Hit Counter by Digits


print page printable version

Dashboard



A WARNING
Operation removal and installation of the instrument panel must be performed carefully. When removing, ensure complete separation of electrical connectors. When replacing, ensure the correct routing and securing wiring harnesses.


Dashboard
Fig. 7.37. Dashboard: 1 - central bracket; 2 - facing the instrument cluster;
3 - the center trim panel; 4 - the instrument panel assembly; 5 - ducts; 6 - lower frame; 7 - bottom right trim panel; 8 - hinge cover glove box; 9 - the glovebox; 10 - a cover of the glove compartment; 11 - the side panel trim; 12 - ashtray; 13 - rear ashtray; 14 - covers the steering column; 15 - the center console; 16 - Sidebar switches; 17 - lower left trim panel; 18 - an arm of the lower left panel finishes; 19 - ventilation grille


Elements of the instrument panel are shown in Fig. 7.37.

Refitting
Switch off the ignition and disconnect the wire from the negative battery terminal.
Disconnect the connectors on the front seat, then remove the four screws and remove the front seat.

A WARNING
When removing do not damage seat upholstery.

Flathead screwdriver, remove the upper trim from the windscreen pillars.
On the reverse side of the steering wheel with an Allen wrench, remove the screws and remove the driver's airbag (DAB).
Remove the pin driver's airbag and horn button.
Loosen the nut of the steering wheel.
After applying the marks on the steering shaft and steering wheel remove a steering wheel special tool (09561-11001).

A WARNING
Do not shoot down the steering wheel with a hammer - so you can damage the injury-preventing mechanism of the steering column.

Remove the screws and remove the upper and lower casings of a steering column.
Disconnect connectors and remove the multi-selector.

Tighten the screws on the lower instrument panel trim
Fig. 7.38. Tighten the screws on the lower instrument panel trim


Remove the two screws and remove the lower trim panel of devices (Fig. 7.38).

Location of bolts and nuts bottom bracket facing the instrument panel
Fig. 7.39. Location of bolts and nuts bottom bracket facing the instrument panel


Remove the two screws and two nuts, remove the bottom bracket facing the instrument panel (Fig. 7.39).

Location screws cladding dash
Fig. 7.40. Location screws cladding dash


Remove the screws and remove the lining of the instrument cluster (Fig. 7.40).

Location screws dash
Fig. 7.41. Location screws dash


Remove the screws and the instrument cluster (Fig. 7.41).
Remove the screws and remove the side panel trim.
Use a screwdriver to pry off the decorative top cover at the back of the center console.

Location screws decorative top cover at the back of the center console
Fig. 7.34. Location screws decorative top cover at the back of the center console


Remove the two screws and remove the decorative top cover on the rear of the center console (see. Fig. 7.34).

Arrangement of bolts and screws holding the center console
Fig. 7.35. Arrangement of bolts and screws holding the center console


Remove the two screws and the two screws holding the center console (see. Fig. 7.35).

Location lateral screws center console
Fig. 7.36. Location lateral screws center console


Remove the four side screws and remove the center console (see. Fig. 7.36).
Flathead screwdriver detach from the dashboard central panel and disconnect it from the connectors.
Remove the screws, remove the radio and air conditioning control panel.
Remove the screws and remove the glove box.

Location screws lower center paneling
Fig. 7.42. Location screws lower center paneling


Remove the six screws and remove the bottom panel of the central finishing (Fig. 7.42).

Location screws dashboard
Fig. 7.43. Location screws dashboard


Remove the screws fixing the instrument panel (Fig. 7.43).
Disconnect the instrument panel connectors.
Remove the duct from the instrument panel.
Remove the screws and remove the dashboard side air vents.
Remove the screws and remove from the instrument panel passenger airbag.
Installation is performed in reverse order of removal. Securely connect and secure all connectors.




« previos page
The center console
next page »
Interior trim

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.