 printable version
Interior trim
Elements of interior trim attached with screws or various types of braces, retainers and pistons. Before removing the element of interior decoration make sure that it does not deter imposed on him other details. First of all, unscrew the screws fixing the visible element of interior decoration. If after this element is not removed, then it is maintained hidden staples or clips, which are typically located around the perimeter of the trim part, and their detachment should be carried out through a wide slot screwdriver. To install, align the retainer with the hole, and clicking on the interior trim panel, clearly indicate it in the hole.
Pillar trim.
| Fig. 7.44. Location upper pillar trim
|
Pry the screwdriver and remove the upper pillar trim (Fig. 7.44).
Cover the front door sill.
| Fig. 7.45. Location of screws and fasteners securing the front door sill lining
|
Remove the screws and remove the front door sill trim (Fig. 7.45).
Padding the bottom side of the footwell.
| Fig. 7.46. Location upholstery screws bottom side of the footwell
|
Remove the screws and remove the upholstery of the bottom side of the space for the legs (Fig. 7.46).
Cover the front door sill.
| Fig. 7.47. Location screws rear door sill lining
|
Remove the screws and remove the front door sill trim (Fig. 7.47).
The upholstery of the central rack.
| Fig. 7.48. Location hidden fasteners securing the bottom upholstery of the central rack
|
Pry the screwdriver and remove the bottom upholstery of the central rack (Fig. 7.48). Remove the upper bolt anchor plate front seat belt. Pry the screwdriver and remove the top upholstery of the central rack.
Pillar trim. Remove the rear seat backrest.
| Fig. 7.49. Location hidden fastening clamps pillar trim
|
Pry the screwdriver and remove the C-pillar trim (Fig. 7.49).
Headliner. To remove the roof lining pre-clear the following elements: - The sun visor and his retainer. Flathead screwdriver, remove the lens of the front interior lighting lamp. Remove the screws and remove the front lights interior lighting. Remove the screws and remove the handrails. Flathead screwdriver, remove the lens of the lamp interior lighting. Remove the two screws and remove the lamp interior lighting.
| Fig. 7.50. Location clamps securing the roof lining
|
Remove the cap to release the lock and remove the headliner (Fig. 7.50). Installation is performed in reverse order of removal.
| 
