 printable version
Switching off anti-theft lock
Enter the current code to deactivate the anti-theft system and resume normal operation of the audio unit. 1. Set the ignition switch to the ACC. (The display will blinks ?�CODE?�.) 2. First, press AUTO-M, then simultaneously press channel button 6 for approximately 2 seconds until the display shows ?�CODE?�.
NOTE Procedure 3 must be performed within 10 seconds after two treatments. |
3. Channel selection buttons 1-4 are used to input the selected code. Button 1 sets the first digit, 2 - second 3 - third, 4 - the last digit. Enter a number within 10 seconds. If the display disappears, repeat the procedure, starting with the first.
ATTENTION Three consecutive errors, including the installation of the ignition switch to the LOCK position and disconnecting audioblka activates anti-theft system, and then restore the normal operation of the audio unit will be impossible. |
4. At the time code display, press the AUTO-M, then simultaneously press channel button 6 for approximately 2 seconds. Indication ?�CODE?� will be displayed approximately 5 seconds.
5. If the display shows ?�Err?� (error), repeat the procedure from step 1.
| 
