add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
eleven Description of vehicle
Restraint System
Seat belts
Instructions for use of seat belts
Automatic locking mode dispensing belt
Seat belts (except central belt in the back seat)
Releasing the seatbelt
Adjustable shoulder belt height
Pyrotechnic pretensioners and load limiters seat belts installed in the front seat
The central belt in the back seat (lap belt diagonally)
Warning light air bag and seat belt pretensioners
Child Safety
Places installation of child restraints
Installation of child restraints
Installation of child restraints to the standard ISOFIX attachment
Airbags - SRS system
Car use to destination
Troubleshooting arisen in a way or before driving
Tables
Engine
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Installation of child restraints



When installing a child restraint, follow all instructions of the manufacturer of a particular product.
In order to secure the child restraint seat belt, which is transferred to the automatic locking mode, follow the instructions below.
1. Ensure secure the rear seat backrest. To do this, click on the back of the seat back until it engages.
2. Secure the child restraint using lap-lap diagonal seat belt. For instructions on wiring belt shown on the label of the child restraint.

Pulling the belt
Fig. 1.139. Pulling the belt


3. To switch the inertia reel seat belt in the automatic locking mode dispensing belt, fully pull out the safety belt coil (Fig. 1.139).
4. Tightly install child restraint on the seat in the car. Make sure that the seat belt is fully retracted and stretched on inertia reel. When the inertia reel is switched to automatic locking mode, returning the belt to the coil will be heard clicks. If the seat belt is pulled and pressed firmly to the child restraint seat, repeat this step.

NOTE
Check to automatically lock the seat belt before each use of the child restraint. If the retractable switched to automatic locking mode, the belt must not be issued when you try to pull it out from the reel. After removing the child restraint belt completely hand over to the inertia reel to switch its mode of emergency locking seat belt. Check the proper functioning of the seat belt before it's put on the passenger seat.


Location of the bracket and the strap on the top of Mazda 3
Fig. 1.140. Location of the bracket and the upper strap on Mazda vehicles 3: 1 - for the right location; 2 - to a central location; 3 - to the left; 4 - upper attachment straps; 5 - Cover


5. If the design of the child restraint provides its holder with the help of the top strap, lift the head restraint strap hook of the mounting bracket and tighten the strap. Follow the instructions of the manufacturer of the child restraint device (Fig. 1.140).




« previos page
Places installation of child restraints
next page »
Installation of child restraints to the standard ISOFIX attachment

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.