 printable version
Removal and installation of the hydraulic unit Anti-lock brake system
ATTENTION Internal components of the hydraulic unit Anti-lock braking system can be damaged if dropped on a hard surface unit. Be careful not to drop the hydraulic unit Anti-lock braking systems. Replace the hydraulic unit Anti-lock braking system, if it is subjected to shock. |
| Fig. 6.61. Hydraulic unit antilock brakes 1 - a socket; 2 - the brake pipe; 3 - Block the hydraulic unit Anti-lock braking systems, the bracket; 4 - an arm; 5 - control anti-lock brakes; 6 - the hydraulic unit Anti-lock brake system
|
Remove the battery and the battery area. Remove the hose (models with manual transmission).
Lift the connector cover in the direction of the arrow while pressing the tab of the cover (Fig. 6.62). Pull connector to the front of the vehicle and remove it.
| Fig. 6.63. Application timing marks on the brake line and the hydraulic unit Anti-lock brake system
|
Mating marks on the brake line and the hydraulic unit Anti-lock braking system (Fig. 6.63). Wrap the connector with protective tape to prevent brake fluid inside. Remove the brake line.
| Fig. 6.64. Removing the hydraulic unit assembly antilock brakes
|
As shown in Figure 6.64, move the arm in the direction of the arrow and remove the hydraulic unit assembly antilock brakes and a bracket from the body.
| 
