printable version
Fully adjustable toe
Set the steering wheel straight and make sure that the wheels of the vehicle is also fitted straight. Loosen the lock nuts of the left and right tie rod and turn the tie rods at the same angles. Both tie rods have a right-hand thread. Turn right tie rod toward the front of the vehicle, the left - to the rear to increase the toe.
NOTE The rotation of both steering drafts for one full turn changes the toe to about 6 mm. |
Tighten the locknuts tie rod nominal torque. The inhaling moment: 68,6-98,0 Nm. Make sure that the cover is not twisted, and install the clamp cover.
NOTE Adjust the toe after setting the camber. |
|