 printable version
Assembly
Set the primary and secondary pistons. Install new O-ring on the locking screw. Fully Depress the primary piston assembly. Install and tighten the locking screw. Torque: 2.0-2.4 Nm.
| Fig. 6.32. The first test of the secondary piston
|
Press and release the secondary piston assembly, make sure that it is kept locking screw (Fig. 6.32). Install the secondary piston so that the hole was drawn to the locking pin and the primary piston. Install new O-ring on the locking pin. Fully Depress the primary piston assembly. Install and tighten the locking pin. Torque: 6,9-9,8 Nm.
| Fig. 6.33. The second test of the secondary piston
|
Press and release the secondary piston assembly, make sure that it is kept locking screw (Fig. 6.33).
| 
