REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 6 (2002 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	6
		Operation and maintenance of car
			eleven Description of vehicle
				The dimensions and general appearance of the car
				Specifications
				Vehicle identification
				Engine compartment
				Capacities units and systems, recommended operational materials
				Keys, locks of doors, sunroof, anti-theft system
				Controls and instrument cluster
				Information display
				Electronic immobilizer (anti-theft system)
				Heater, air conditioning and ventilation system of the car interior
					Adjustable vents
					The air conditioning system with manual control
					Heating mode
					Cooling mode
					Ventilation mode
					Mode blowing windscreen
					Dehumidification mode (with the inclusion of the air conditioner)
					Automatic climate control
					Air recirculation (LED on)
					Ventilation mode (LED is off)
					Work automatic climate control system
					The sensor of solar radiation and temperature sensors
					General recommendations for the operation of air conditioner
				Lever of lay brake system
				Seats
			Restraint System
			Car use to destination
			Troubleshooting arisen in a way or before driving
		Engine
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body

printable version

Cooling mode

1. Set the mode of distribution of air in position

2. Turn the air temperature in the left quadrant.

3. Set the switch to the desired fan speed.

4. Press the switch "A / C" to turn the air conditioner.

5. Set the fan speed and air temperature that maintain comfortable conditions in the car.

ATTENTION

If the air conditioner running while driving on long slope or when driving in urban conditions in heavy traffic, closely monitor the reading of the engine coolant temperature.

The additional load on the engine by the air conditioner may cause engine overheating. If the engine overheats, turn off the air conditioner.

If you want the fastest possible cooling of the passenger compartment, turn the temperature control to the left, turn the recirculated air mode, and then set the fan speed to "4". If you wish to be in the zone the legs did the warmer air, turn the handle of the mode switch air distribution

and using a temperature controller supports the most comfortable conditions. Air entering the zone the legs, has a higher temperature than the air which is directed into the upper zone number (except when the temperature control is set to the leftmost or rightmost position).

« previos page
Heating mode

next page »
Ventilation mode