The air conditioning system with manual control

The regulator temperature.

The air temperature is adjusted by turning the handle. Turning the knob clockwise increases the temperature, and counter-clockwise - decreases (Fig. 1.106).

Switch fan speed.

Switch (see. Fig. 1.105) allows you to adjust the fan speed:

About - The fan is switched off;

1 - Low speed;

2 - Average speed;

3 - High speed;

4 - Maximum speed.

Mode switch air distribution.

Turn the knob to switch to one of the positions that corresponds to your chosen mode of distribution of air (see. Fig. 1.105).

Switch the air conditioner.

In order to turn the air conditioner, press the switch "A / C" (see. Fig. 1.105). Air-conditioning is included (in this case turns of button display), when the fan (fan switch must be in one of the positions "1", "2", "3" or "4").

To turn off the air conditioner, press the switch "A / C" again.

Mode switch interior ventilation.

Switch (see. Fig. 1.105) mode allows you to turn off the ventilation and recirculation mode, and vice versa.

Press the switch To switch the current mode of ventilation of salon (for example, turn off ventilation and turn on the air recirculation or vice versa).

In normal driving conditions is recommended to full-time use of forced ventilation.

Ventilation mode (LED is off).

The interior receives ambient air from outside the car. Use this mode for ventilation and heating the cabin under normal conditions.

Air recirculation (LED on).

Access to the interior of the car stopped outside air. The air inside the passenger compartment is circulated in a closed loop. Recirculation mode is recommended when driving in dusty conditions the air and in similar cases, when you need to isolate the interior of the vehicle from the surrounding atmosphere. Activating recirculation also helps speed up the cooling air inside the vehicle.