printable version
Maintenance remote control
If the system does not react to pressing buttons on the remote control and built-in indicator does not light up, the possible reason is the discharge of the battery remote. Replace the battery to restore your console. Insert the battery in the remote control so that the labeling of the positive pole () facing down. Improper installation of the battery electrolyte to flow. When replacing the battery, be careful not to bend the electrical contacts, as well as expose the electrical contacts of the oil contamination. Make sure that the remote control housing no dirt. It can bring the console unusable. If a replacement is carried out correctly, there is danger of an explosion of the battery. Replace only with CR1620 batteries or fully equivalent. When disposing of end-of-battery, observe the following rules: - Insulate the positive and negative poles of the battery using cellophane tape, or; - Do not disassemble; - Do not throw batteries into fire or water; - Do not deform or crush the battery.
|