 printable version
The lock and a cable lock actuator
Remove the front grille decorative facing. If you want to re-install the locking mechanism of the bonnet, a marker, mark the position of the castle.
| Fig. 12.1. Location bolt and nut (1) securing the bonnet lock mechanism
|
Loosen the lock nut and bolt, cable, disconnect the bonnet and remove the locking mechanism (Fig. 12.1). In the car, loosen the nut and disconnect the cable from the bracket. Adhere to the cable cord, pull it into the car and untie the cord, leaving him in the partition wall of the engine compartment. Power required for drawing of a new cable in place. Tie the rope to the new power cord and thread it into the bulkhead. Further installation is carried out in reverse order of removal. If the old cable is damaged, the hood can be opened by lifting the front of the car and activating the lock from the bottom of the car, which use a long thin screwdriver.
| 
