printable version

Cable shift

Withdrawal

PERFORMANCE ORDER

1. Remove the central console. 2. Remove blower heating system. 3. Remove the four screws position indicator gear lever and remove the indicator. 4. Disconnect the cable from the gear shift lever. 5. Squeeze the tabs latch and disconnect the wire from the housing the gear lever. 6. Remove the air filter housing. 7. Remove the cap lock (A) and disconnect the wire from the switch lever (B) on the gearbox. 8. Disconnect the cable from the gearbox. 9. Unscrew the two screws securing the cable grommet to the engine compartment partition wall.

Setting

Installation of the cable is carried out in reverse order of removal.

Adjustment

PERFORMANCE ORDER

1. Set the shift lever in the parking position (PARK). 2. Remove the indicator lever position. 3. Remove the clamp (A) and press the adjustment button (B). 4. Set the switching lever on the gearbox in the parking position and lock the gearshift lever pressing in the adjusting button. 5. Put the adjustment lock button. 6. Install the remaining parts and inspect how the shift lever.