REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
			Manual Transmission
			Automatic transmission
				Introduction
				Specifications
				Diagnostics
				The shift lever
				Cable shift
				The system interlock
				Sensor Transmission
				Seals axles
				Removing and installing automatic transmission
		Coupling and semiaxes
		The brake system
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

Sensor Transmission

Check

PERFORMANCE ORDER

	1. Disconnect the sensor (in the corner shows the location of contacts in the contact socket of the sensor).
2. Place the shift lever at a time in each of the positions. Perform measurements and compare the results with the data in the tables Check the sensor transmission (4ET and GF4A-EL) and the sensor check gearbox (CD4E and LA4A-EL).

Check sensor transmission (4ET and GF4A-EL)

Check sensor transmission (CD4E and LA4A-EL)

Adjustment (4EAT and GF4F-EL)

PERFORMANCE ORDER

1. Set the shift lever to the neutral position. Disconnect the cable from the gear lever switch lever on the gearbox.
	2. Loosen the bolts of the switch and turn it to align the label of a neutral position (A) to the switching rod (B).
	3. Disconnect the sensor and connect an ohmmeter to contacts responsible for the neutral position. The circuit between the contacts should be closed.
4. Tighten the screws and set the switch lever and a rope.

Replacement

PERFORMANCE ORDER

1. Lift and fix a forward part of the car.

2. Disconnect the sensor.

3. Set the gear lever to the neutral position.

4. Remove the bolts of the sensor.

5. Install the new switch and adjust the sensor.

next page »
Seals axles