printable version

Dashboard

The speedometer indicates the vehicle speed in the forward direction.

The odometer and trip odometer

1. Selector odometer / odometer 2. The display odometer / odometer

1. Odometer 2. Odometer

The ignition key must be in position ON (II).

To change the display mode from the odometer to the trip odometer, and vice versa, press. The selected mode will be displayed on the display.

Odometer

When this mode is selected, the display will show ODO.

The odometer records the total distance traveled by the vehicle.

Odometer

With this setting, the display will show TRIP.

Odometer records the total distance traveled by the vehicle before the reset of this counter. To reset this counter to "0", press and hold the button for 2 seconds.

Use this counter to measure the lengths of routes and to calculate the fuel consumption.

In the event of a power failure (blown fuse or the battery is removed) record will be erased.

Coolant temperature

1. The normal range

This displays the temperature of the liquid engine coolant. If the needle exceeds normal range, rising to H, it indicates overheating.

Driving with an overheated engine can cause serious engine damage.

The fuel gauge

The fuel gauge indicates how much fuel is left in the tank.

This unit continues to show how much fuel is left, even when the ignition is switched off.

Tachometer

1. Red Zone

The tachometer indicates engine speed in thousands of revolutions per minute (rpm).

Use this tool when selecting the shift points and to prevent overloading of the engine when operating at low speed at full throttle and excessive speeds.

Do not run the engine from the tachometer needle in the red zone. This can lead to severe engine damage.

1. Bright 2. Dim

When the parking lamps or headlamps, turn the thumb wheel for adjusting the brightness of the dashboard.