 printable version
Cars with rear lights, shown in Fig. 325
Replace the rear lights must be carried out in the following order:
| Fig. 326. Location of the bulbs in the rear light (on the left shows the tabs holding the cover lock): 1 - Brake lamp, parking and marker lights, 12 V, 21/5 W; 2 - reversing light bulb, 12 V, 21 W; 3 - Indicator light, 12 V, 21 W; 4 - light fog lights (only the driver's side), 12 V, 21 W
|
- To replace the lamp, press the two catches in the direction of the arrows shown in Fig. 326, and remove the bulb holder. Faulty lamp push into the cartridge, turn left and take out. Install the new lamp, and reinsert the holder; - To replace the lamp unscrew four screws from the lens; - Disconnect the connector and remove the wire. Just check the installed gasket; - Unscrew the nut on the inside and remove the lamp. The installation should be carried out in reverse order.
|
