 printable version
Replacing the headlight housing
Since the replacement headlights always involves their subsequent adjustments are described below in view of the mandatory operation of the headlight adjustment after replacement. The housing lamps need to be replaced as follows: - Disconnect the negative terminal of the battery;
| Fig. 320. Location bolts grille
|
- Open the hood and unscrew the screws of the grille in the areas shown in Fig. 320. Remove the grille; - Unscrew the mounting indicators and take them out; - Disconnect the wiring harness connector to the back of the headlamp; - Disconnect the vacuum hose corrector;
| Fig. 321. Location bolts lens unit
|
- Unscrew shown in Fig. 321 bolts and remove the headlight forward. The installation should be carried out in reverse order. After installation, check headlight adjustment.
| 
