Also install together and wrap the hood, without tightening the bolts to the bonnet hinges. Get this position Bonnet to the castle was closed when the hood installation height 1-1.5 mm below the front wings
(Fig. 9.2). Achieve uniform gap between mating parts of the body. Tighten the bolts of the bonnet. Loosen the bonnet catch bolts
(Fig. 9.3), followed by 2-3 times, open and close the hood to lock in the correct position, then tighten the lock bolts. With adjustable rubber stoppers set the position of the hood in the closed position 2 mm below the level of the front wings. Ensure uniformity of the gap between the bonnet, wings and front body panels. In
Fig. 9.4 gives the values of the gaps that need to be in the installation of doors, hood and trunk of the car.
