add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Almera (from 1995 to 1999, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Almera
Home
 
Nissan
Almera
General Information
General requirements for car repair
Operation and maintenance of car
Petrol engines
Diesel engines
Transmission
Chassis
A steering
The brake system
Electrical
Accumulator battery
Generator
Starter
Removing and installing starter
Dismantling and assembling starter
Removal and installation of the instrument cluster
Devices lighting and light-signaling
Window cleaners
On-board electrical network
Body
Applications
Scheme of electrical equipment
 


Hit Counter by Digits


print page printable version

Starter



The starter motor is a DC series excitation and two-winding of the relay. Anchor starter rotates in self-lubricating bushings Features starters are given in the Table. 8.5 and 8.6.

Table 8.5 Characteristics of starters gasoline engines
Characteristic
Cars with automatic transmission
Vehicles with manual transmission
with gear
without gear
Type
S114-766A
M1T-72087A
M1T-77 281
S114-769A
S114-630
MZT37783
M0T80285
The idle mode (at a voltage 11 V):
Current consumption, A
<85
50-75
<85
<60
<60
<90
speed anchors, min - 1
> 2950
3000-4000
> 2950
> 7000
> 6500
> 2750
The minimum allowable diameter collector, mm
28
28.8
28
39
31.4
28.8
Minimum permissible height of the brush, mm
10.5
12
10.5
eleven
11.5
7
The contact pressure of brushes H
15.88
13,43-25
14,4-17,35
17,35-21,17
13,43-25
11,56-23
The gap between the thrust ring and the lid, mm
<0.2
-
<0.2
-
<0.2
-
<0.2
The gap between the gear and the stop, mm
03-2,5
0.5-2.0
-
03-2,5
-
05-2,0
?�

Table 8.6 Characteristics of starters of diesel engines
Characteristic
With gear
Mitsubishi
Hitachi
Mitsubishi
Type
M2T-62071A
S13-305 / S13-331
M2T-61871A
The idle mode (at a voltage 11 V):
?�
?�
?�
Current consumption, no more, A
105
140
110
rotational speed of the armature, not less than m - 1
4030
3900
4100
The minimum allowable diameter collector, mm
31.4
35.5
31.4
The minimum height of the brush, mm
11.5
eleven
11.5
Clamping force brushes H
13,43-25
27,8-33,6
13,4-25
The gap between the gear drive and the thrust ring focus, mm
-
0.3-2.0 / 0.3 / 0.8
-




« previos page
Disassembly and assembly of the generator
next page »
Removing and installing starter

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.