add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf II, Jetta (from 1983 to 1992, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Golf 2 / Jetta
Home
 
Volkswagen
Golf 2 / Jetta
General Information
Engine
The power supply system
Coupling
Transmission
Transmission
Specifications
Transmission type 009
Transfer case
The propeller shaft
Viskomufta
Rear Differential
Gear freewheel
Front-wheel Drive
A steering
Suspension
Brakes
Body
Electrical
 


Hit Counter by Digits


print page printable version

The propeller shaft



The propeller shaft

1 - transfer case;
2 - Transmission;
3 - a bolt;
4 - flexible coupling;
5 - a bolt;
6 - a cover;
7 - front propeller shaft;
8 - a cover;
9 - a bolt;
10 - flange;
11 - a lock ring;
12 - elastic coupling;
13 - a bolt;
14 - washer;
15 - flange;
16 - a bolt;
17 - an arm of the intermediate support;
18 - the bearing;
19 - Intermediate propeller shaft;
20 - a bolt;
21 - an arm of the intermediate support;
22 - the bearing;
23 - flange;
24 - washer;
25 - a bolt;
26 - elastic coupling;
27 - lock washer;
28 - flange;
29 - a bolt;
30 - Rear propeller shaft;
31 - a bolt;
32 - elastic coupling;
33 - a bolt;
34 - viskomufta

Withdrawal

PERFORMANCE ORDER
1. Remove the muffler.
2. Remove the heat shield under the propeller shaft.
3. Loosen the screws 16 and 20 of brackets 17 and 21 piers.
4. To mark the relative position of the rear propeller shaft 30 and secondary propeller shaft 19.
5. Remove the screws 29.
6. Unscrew the bolts 31.
7. Push the middle propeller shaft 19 forward and remove the rear propeller shaft 30.
8. Loosen the screws 3.
9. Slide the cover and unscrew the 6 screws 5.
10. Loosen the screws 16 and 20 and to remove the brackets 17 and 21.
11. Remove the propeller shaft, slightly pushing in the direction of the exhaust manifold.

Setting

PERFORMANCE ORDER

Install the propeller shaft is carried out in reverse order, to removal, taking into account the following:
- Tighten the bolts 16 and 20 to 25 Nm.
- Tighten the bolts 9 and 29 to 40 Nm.
- Tighten the screws 5 to 45 Nm.
- Tighten the screws 33 to 45 Nm.





« previos page
Transfer case
next page »
Viskomufta

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.