1. Set the motor 4 on the bracket 1 and tighten the screws 16. |
2. Set the lever 18 to the position shown in Fig. Installation of the lever of a windscreen wiper motor, and tighten the nut 17 (see. Fig. Windscreen wiper). Tighten the bolt with a washer 6, but do not tighten hard. |
3. Install thrust 9. |
4. Insert the bracket into the hole grommet 1 5. |
5. Fit the washer rollers 7. |
6. Set the bracket assembly 1 on the body, head with the rollers in the spacer 8, mounted in rubber bushing 5. |
7. Tighten the nut torque 10 Nm 7 |
8. Attach the wires to the motor 4. |
9. Install the wiper arm 14 (see. Subsection 12.8.1). |
10. Attach a wire to "the minus" plug of the storage battery. |
11. Check the operation of the wiper. |