 printable version
Six-cylinder diesel engines
Withdrawal Release clamps and remove the front section of the bottom mudguard of a motor compartment. Remove the screws and remove the engine cover. On the left front side of the engine compartment, remove the screw fastening the bracket supporting the air-conditioning duct system. Install the front transverse panel in service position.
| Fig. 17.22. Unscrewing bolts radiator fan with viscous coupling
|
Remove the bolt radiator fan with viscous coupling, keeping the axis of rotation of the fan the other wrench (Fig. 17.22). Remove the left and right casings of a gear belt. Remove the screws and remove the casing of the V-ribbed belt. Remove the cap from the roller mechanism of a tension V-belt air conditioning compressor.
| Fig. 17.23. Location bolts tensioning pulley V-belt air conditioning compressor
|
Loosen the bolt tensioner pulley V-belt air conditioning compressor and remove the belt from the pulleys (Fig. 17.23). Remove electrical cords out of the air conditioning compressor mountings.
| Fig. 17.24. Arrangement of bolts of fastening of an arm conditioning compressor to six-cylinder diesel engines
|
Unscrew the four screws on the air conditioning compressor (Fig. 17.24). Move the air conditioner compressor together with attached wires and tubes to the side and a soft wire fix it on the body.
Setting Installation is spent to sequences, return to removal, taking into account the following. When installing the air conditioning compressor, check that the dowel sleeves are in place. Tighten the air conditioning compressor bracket to 20 Nm. Install poly V-belt drive compressor.
| Fig. 17.25. Adjusting the tension of the V-ribbed belt air conditioning compressor: 1 - bolt tensioning pulley V-belt; 2 - ribbed belt air conditioning compressor; 3 - Torque Wrench
|
Torque wrench with hexagon head 6 mm Turn tensioning pulley V-belt air conditioning compressor counterclockwise until 7 Nm and hold the torque wrench in this position, a second wrench to tighten the bolt tensioner pulley V-ribbed belt 25 N ?� m (Figure . 17.25).
| 
