 printable version
Cylinder lock the glove box
Withdrawal Uncover the glovebox.
| Fig. 16.46. Arrangement of screws (1) and clips (3) of the trim panel (2) glove box lid
|
Remove the four screws 1 (Fig. 16.46). Blade screwdriver to push the trim panel retainers 2 of 3 in the direction of the arrow A by 15 mm. Lift trim panel 2 by 15 mm and separate the trim panel from the glove box lid.
| Fig. 16.47. Forced off the hinges Handle opening the glove compartment: 1 - the handle; 2 - Screwdriver
|
Blade screwdriver 2 (Fig. 16.47) on both sides press the hinges and remove the handle 1 opening of the glove box.
| Fig. 16.48. Forced off the bracket from the handle of opening of the glove box 1 - the handle; 2 - an arm; 3 - Screwdriver
|
Blade screwdriver 3 (Fig. 16.48) on both sides of the bracket 2, and press to remove it from the handle 1 opening of the glove box Insert the key into the lock cylinder cover of the glove compartment.
| Fig. 16.49. The direction of squeezing the clamps (1) when removing the lock cylinder (2) glove box lid
|
Press catches 1 (Fig. 16.49) and clicking on the lock cylinder 2, remove it from the handle.
Setting Installation is performed in reverse order of removal.
| 
