 printable version
Egnition lock
Withdrawal Set the wheels of the car to move straight ahead. Remove the steering column switch.
| Fig. 18.58. Cylinder ignition 1 - the electrical connector; 2 - the ignition lock; 3 - column cover; 4 - an electric socket pickup coil the immobilizer; 5 - the screws
|
Disconnect the electrical connector 4 (see. Fig. 18.58) from the pickup coil the immobilizer. Disconnect the electrical connector 1 from the nest 2 ignition. Insert the key into the ignition and turn it to the ?«Ignition on?». Remove the paint from the safety of the two mounting screws 5 the ignition, remove the bolts and pulling, remove the ignition of the housing 3 of the steering column.
Setting Make sure that the ignition key is in the ?«Ignition on?». Insert the ignition housing and secure it with screws. Paint the bolt heads. Further installation is carried out in reverse order of removal.
| 
