 printable version
The bottom mudguard of a motor compartment
| Fig. 16.8. The bottom mudguard of a motor compartment 1 - the screw; 2 - the front section of the bottom mudguard of the engine compartment; 3 - the screw; 4 - the rear section of the bottom mudguard of the engine compartment; 5 - the screw; 6 - an arm; 7 - a bolt; 8 - a spring nut; 9 - spring nut; 10 - clamping pin; 11 - facing recess of the front wheel; 12 - the front bumper; 13 - front transverse panel
|
The bottom mudguard of a motor compartment and its fastening elements are shown in Fig. 16.8.
Withdrawal Lift the front of the vehicle. Remove the self-tapping screws that secure the bottom mudguard of a motor compartment (see. Fig. 16.8). When installing the front transverse panel in service position is necessary to turn the screws 1 that secure the front side mudguard. Turn 180 ?� and remove the clamping pins 10. Remove the front and rear section of mudguard of a motor compartment.
Setting Install the engine splash guard and secure it with self-tapping screws, having tightened their moment 2 Nm. Insert the clamping pins and rotate them 180 ?�. Lower the car.
| 
