 printable version
Removing and installing Thermoscreens
While the engine exhaust system is heated to a high temperature. Therefore, when a strong mechanical failure or significant corrosion Thermoscreens installed on the elements of the system, be sure to replace them. In addition to reducing the level of comfort in the cabin, Thermoscreens failure could cause a fire termoshumoizolyatsii body floor as converter exhaust gas is heated to over 600 ?� C. To remove termoekrana exhaust manifold, do the following. 1. Remove the three screws termoekrana ... NOTE The lower bolt termoekrana exhaust manifold can not fully turn out. It is enough to turn it a few turns. |
2. ... termoekran and remove exhaust manifold. 3. Set termoekran exhaust manifold in the reverse order of removal.
To remove the silencer termoekrana do the following. | | 1. Remove the four screws on the base body termoekrana ... | 2. ... press the silencer down as far as the firmness of pillows, and remove termoekran. |
A WARNING Termoekrana sharp edges. With his withdrawal protect hands from injury or cloth gloves. |
3. Set termoekran main muffler in the reverse order of removal.
To remove termoekrana additional muffler, do the following. | | 2. Remove the four nuts termoekrana additional muffler body to the ground ... | 3. ... and remove termoekran wring silencer down as far as the resilience of the system. |
A WARNING Termoekrana sharp edges. With his withdrawal protect hands from injury or cloth gloves. |
4. Install termoekran additional muffler in the reverse order of removal.
To remove termoekrana converter do the following. | | 2. Remove the four nuts termoekrana catalyst to the base of the body ... | 3. ... and remove termoekran by pushing down converter so far as the resilience of the system. |
A WARNING Termoekrana sharp edges. With his withdrawal protect hands from injury or cloth gloves. |
4. Install termoekran converter in the reverse order of removal.
| 
