add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Design Features
Mounting blocks
Accumulator battery
Generator
Starter
The switch (lock) of ignition
The engine management system
Lighting, light and sound alarm
Replacing windscreen wiper motor-reducer
Removal and installation of a washer of glass of a wind window
Removal and installation of the electric motor of the basic fan cooling radiator
Removal and installation of the electric motor of the additional fan cooling radiator
Heated tailgate window glass
Removing and installing cigarette lighter holder
Device combination
Design Features
Possible malfunctions of the instrument cluster, their causes and remedies
Removal and installation of the instrument cluster
Replacing control lamps and instrument lighting
Replacement devices
Switches dashboard
Replacing the control unit power windows
Car audio system
Replacement sensors and switches
Body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Removal and installation of the instrument cluster



You will need a Phillips screwdriver with a blade.
1. Disconnect a wire from the plug "minus" of the storage battery.
2. Remove the control unit with heating and air-conditioning (see. "Removing and installing control unit with heating and air conditioning"), without disconnecting from it pads harness; Lower down a bit, to get access to the screws fixing the instrument panel trim ...
3. ... and remove the screws.
4. Remove regulator electroproof headlights (see. "Replacing the regulator electroproof headlights") ...
5. ... and turn him located the two screws securing the lining.
6. Remove the two screws securing the liner above the instrument cluster ...
7. ... take away the lining of the instrument panel ...
... 8. Disconnect the wiring harness from the switch and remove the dashboard trim.
9. Remove the four screws fixing the instrument cluster ...
10. ... Take it from the dashboard, disconnect the three pads harness and remove the instrument cluster with the car.
11. Install the parts in reverse order of removal.




« previos page
Possible malfunctions of the instrument cluster, their causes and remedies
next page »
Replacing control lamps and instrument lighting

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.