 printable version
Removing and installing the generator
You will need two keys "to 12". 1. Disconnect a wire from the plug "minus" of the storage battery.
NOTE Alternator drive belt and the power steering pump do not need to be removed from the vehicle, it is enough to remove it from a generator pulley. You do not have to remove the air conditioning compressor belt. |
| | 3. Finally, remove the bolt of the generator to a tension lath. | 4. Press the latch and disconnect the harness connector from the generator. |
| | 5. Remove the nut on the tip of the wire ... | 6. ... and disconnect the wire from the output of the generator. |
7. Remove the 2 nuts, bolts holding 1 from turning and remove the bolts. NOTE Photos fastening of the generator is made from below the car for clarity. Loosen the nuts and remove the screws on top of the engine compartment. |
8. Remove the generator from the engine compartment. 9. Install the generator in reverse order of removal.
| 
