add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
The fuel system of petrol engines
The fuel system of diesel engines
Technical data
General information about the injection system ?�Common Rail?�
Features of the injection
Controlling fuel injection
The main fuel injection
Additional fuel injection
Reducing emissions
Common Rail fuel system
EDC Control System
ECU
Management of the maximum amount of air entering the engine
The active shock absorber, reducing fluctuations of the engine speed of the engine
Switching off the engine
Glow plugs
Removal and installation of injectors
Installing the high pressure fuel pump
Meter of air (Air flow sensor - AFS)
The coolant temperature sensor (ECT)
Camshaft position sensor (CMP)
Sensor crankshaft angle
Sprayers
Fuel pressure in the high pressure accumulator (RPS)
The fuel temperature sensor (FTS)
Pressure control valve
Troubleshooting
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Technical data



Technical data

Name
Technical requirements
Fuel tank
55 l
Fuel filter
High pressure
Fuel pump
Electric installed in the fuel tank
The pressure of fuel supplied to the injectors
1350 bar
Sprayers
Electromagnetic type
Airflow Meter
HFM5 (Hot Film Sensor)
Air temperature sensor
Resistance
2,28-2,56 ohms at 20 ?� C
0,300-0,380 ohms at 80 ?� C
Coolant temperature
Thermistor
Resistance
2,31-2,59 ohms at 20 ?� C
0,314-0,331 ohms at 80 ?� C
Speed sensor
Hall Sensor
Camshaft position sensor (CMP)
Hall Sensor
Sensor crankshaft angle
Inductive
Accelerator pedal position sensor
Variable resistor
Fuel pressure sensor
Piezoelectric
The fuel temperature sensor
Thermistor
Resistance
2,27-2,73 ohms at 20 ?� C
0,322-0,389 ohms at 80 ?� C

Adjusting data

Data
Value
The idle speed, min -1 Lever in position N
A / C OFF
750 ?� 40
A / C ON
800 ?� 40

Sealant

Data
Value
Coolant temperature
THREE BOND TB 2403

Tightening torques, N ??? m

Data
Value
Bolts tube fuel line (Common Rail)
8-10
Coolant temperature
20-40
Nuts with flange mounting throttle knot
7-11
Bolts throttle knot
7-11
Bolts of fastening of the fuel filter
9-14
Bracket bolts of the accelerator lever
8-12
The tube, which connects the fuel line and the injector 1/2/3/4
25-29
The pressure sensor in the fuel line
31-41
Clamping screw the fuel injector
25-29
Bolts high pressure fuel pump
13-18
Bolt the EGR valve solenoid
7-11
Self-locking nut securing the EGR valve gasket
25-30
Bolt EGR pipe
20-30
Bolt CMP sensor
4-6
Bolt CKP sensor
4-6
Oil pressure sensor
15-26
The tube, which connects the fuel line and the high pressure pump
18-23
Function Block
7-11
Bolts fuel line (Common Rail)
18-28
Regulator pressure fuel line
5.1




« previos page
The fuel system of diesel engines
next page »
General information about the injection system ?�Common Rail?�

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.