add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
Technical data
Removing and installing ignition coils
Check the ignition coil
Checking the ignition
Check spark plugs
Analysis of spark plugs
Check operation of spark plugs
High voltage wires
Egnition lock
Troubleshooting
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Check operation of spark plugs



Connect to a high-voltage spark plug wire. Hold the spark plug special pliers with insulated handles, connect the frame of the vehicle with a mass of candles.

Do not touch the body of the car during the following operations.

The assistant should crank the engine starter, and the spark between the electrodes should be observed sustained strong spark.

If there is no spark or weak spark, check the condition and correct the following defects:

- The presence of soot and clean or replace the spark plug;
- When oil contamination clean or replace the spark plug;
- When worn or burnout, replace the spark plug electrodes;
- The destruction of the ceramic insulator, replace the spark plug;
- Ring is damaged, replace the spark plug spark plug;
- In violation of the electrode gap in the spark plug, adjust gap.





« previos page
Analysis of spark plugs
next page »
High voltage wires

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.