printable version
Overview
Collapsible steering, a height-adjustable (tilt) steering column, a rack and pinion steering. Steering gear assembly with steering rods mounted in the engine compartment to the shield on the front end bracket c using staples. Mounting is via rubber cushions weld nuts on the bolts.
Tightening torques in Nm: Shaft power steering Bolt steering shaft ..... 13-18 Nut steering wheel ..... 35-45 Bolt universal joint shaft to the steering gear drive ..... 3-18 Bolt anther ..... 17-26 Steering gear Bolts steering ..... 60-80 Bracket bolts to the steering stretcher ..... 90-110 Locknut tie rod ..... 50-55 Nut finger of the spherical rod end ..... 24-34 Fitting fastening of the oil pipeline to the steering mechanism ..... 10-16 Bolt to the distributor of gear ..... 16,7-25,5 Lock nut of the adjusting screw lock steering rack ..... 49-68,6 Hydraulic system Power steering fluid reservoir bolt ..... 4-6 Bolt-steering hoses ..... 4-6 Power steering pipe bolt ..... 4-6
Basic data for the adjustment and control Free wheeling of a steering wheel, mm | 0-30 |
The angle of rotation of the wheels: internal outdoor | 37 ?� 42 '?� 1 ?� 30' 33 ?� 03 ' | The force of the steering wheel with the vehicle stationary, H (kgf) | 29 (3.0) | Normal deflection power steering pump drive belt, mm | 6-9 | Power steering pump discharge pressure, MPa (kgf / cm 2) | 6,3-7,06 (65-72) | Torque drive gear Nm | 0.6-1.3 | Moment of resistance turning of the steering rods, Nm | 2,5-5 | Moment of resistance-rotation thumb ball rod ends, Nm | 0.5-2.5 |
Technical specifications Type steering | Rack | Progress rail mm | 132 | Type of steering pump | Blade | Feed pump cm 3 / rev, no more | 9.6 |
Applied Lubricants Place of application | Name | amount | Contact ring the alarm | CENTOPLX278 (KLUBER, Korea) | 1.5 g | Bearing steering shaft | ALVANIA # 2 or # 3 (KEUK DONC SHELL, Korea) | As required | The spherical rod end | SHOWA SUNLIGHT MB-2 or equivalent | Also | Carter steering | ONE-LUBER RP GREASE (KYODOYUSHI, Japan) | > | Axial ball joint steering | LONG TIME PD2 (OPTIMOL, Germany) | > | The contact surface of the protective cover and rails | SILICONE GREASE (RCD MS511-41) | > | Hydraulic fluid amplifier | PSF-3 | 0.75-0.8 l |
Special tools and accessories Catalog number of spare parts and accessories | Name | Application | 09568-3100 | Puller for ball joint rod end | Pulling out ball joint tie rod from the steering knuckle | 09572-21000 | Test pressure gauge | Check the pressure in the hydraulic power-assisted steering (used in conjunction with adapters 09572-22100, 09572-21200) | 09572-21200 | Adapter for test pressure gauge (from a hose) | Check the pressure in the hydraulic power-assisted steering (used in conjunction with a pressure gauge and adapter 09572-21000 09572-22100) | 09572-22100 | Adapter for test pressure gauge (pump side) | Check the pressure in the hydraulic power-assisted steering (used in conjunction with a pressure gauge and adapter 09572-21000 09572-21200) | 09573-21000 | Guides | Installing seals (used in conjunction with devices 09573-21100, 09573-21200, 09517-11000, 09555-21000) | 09573-21100 | Mounting accessories balling | Installing seals | 09573-21200 | Guides | Removal and installation of the gland |
|