printable version
Removing and installing tailgate
Withdrawal
| Fig. 8.4. Connector wires of the rear window
|
Disconnect the wiring connector of the rear screen (Fig. 8.4). Remove the lining of the tailgate.
| Fig. 8.6. Removing the top decorative overlay
|
Remove the top cover of the rear door frame (Fig. 8.6).
Remove the four self-tapping screws and remove the trim panel of the tailgate (Fig. 8.7).
| Fig. 8.8. Removing the side panel trim tailgate
|
Remove the side trim panel of the tailgate trim (Fig. 8.8). Remove the four screws and remove the tailgate trim.
| Fig. 8.9. Removing the license plate light
|
Remove the four screws and remove the lights license plate light (fig. 8.9).
| Fig. 8.10. Removing the center console tailgate
|
After removing the mounting screws (2EA), disconnect the stem and remove the central console tailgate (Fig. 8.10).
Remove the lock cylinder by removing the mounting bolt and remove the rear window cleaner (Fig. 8.11). Disconnect the power plug of the motor ochitstitelya rear window.
| Fig. 8.12. Removing the rear window wiper motor
|
Remove the rear screen wiper motor after removing the mounting nut (Fig. 8.12). Remove the actuators levers back door, disconnect the connector and remove the levers.
Remove the tailgate latch. Remove the lifter back door of the ball joint. Remove the tailgate mounting bolts after removing the hinge back door.
Setting Installation is the reverse order of removal.
|