printable version
Auto-dimming rearview mirror with compass option)
Interior rearview mirror with an electric drive automatically tracks the blinding headlights of cars traveling behind. When you press and hold for 3 to 6 mirrors with memory function is activated when you press and hold the button, memory function is turned off.
Managing the Compass Press and release the button - the display will reflect the direction of the vehicle. If you press the button, the direction of movement will go off. Designation reading the direction of movement of a vehicle: - E - East; - W - west; - S - south; - N - north. Intermediate values (example): - NE - Northeast.
Setting the compass Press and hold the button for more than 9 seconds. When the compass memory cleared, the display will show "C". Make a car two full circle at a speed of less than 8 miles / hour, or until the display indications of direction. If the setting is not completed compass, make a car full circles in opposite directions. If you then configure the compass is not complete, repeat the procedure.
Additional mirror
Additional mirror is used for ease of communication front to rear passengers without the need to turn around to them. To use an additional mirror, click on the panel and open the mirror. Set it to the desired position. After use, close the panel.
ATTENTION Do not adjust the mirror and do not talk with the passengers for a long time while driving. You can lose control of the vehicle control, which, in turn, may lead to traffic accident (crash). |
Parking brake
Always set the parking brake before leaving the car. When the parking brake when the ignition key is in the ?�ON?� (?�On.") Or the ?�START?� (?�starter"), the instrument panel warning lamp parking brake. Before beginning operation, make sure the parking brake is fully off and the indicator lamp is off. To activate the parking brake, press the parking brake pedal. To turn off the parking brake, press the parking brake pedal repeatedly. Always set the parking brake before leaving the car. When the parking brake when the ignition key is in the ?�ON?� (?�On.") Or the ?�START?� (?�starter"), the instrument panel warning lamp parking brake. Before beginning operation, make sure the parking brake is fully off and the indicator lamp is off.
Parking brake - Type A To activate the parking brake, pull the lever up until it stops. To turn off the parking brake, pull the parking brake lever up slightly and press the button on the end of the handle. Then, press the button, lower the lever down.
Parking brake - Type B To activate the parking brake, press the pedal. To turn off the parking brake, press the pedal again.
NOTE Periodically check the parking brake pedal. |
|