 printable version
Combination switch lights, headlights and turn indicators
Turn signal switch As you move down the combination switch direction indicators flashing on the left side of the car. When moving the combination switch upward direction indicators are flashing on the right side of the car. After the completion of the turn the switch will automatically move to the neutral position and the direction indicators stop flashing. If the control indicator lamps on the instrument panel flashes more often than usual, lit but not blinking or does not light up at all, it indicates a fault circuit indicator lamps. Check the fuse and light bulbs.
Operating mode switch when changing series
| Fig. 1.43. Operating mode switch when changing series
|
Rebuilding lanes motion move the lever up or down to turn on the direction indicators. After releasing the lever automatically returns to the neutral position (Fig. 1.43).
Switch headlamps
Turn the tip on the end of the combination switch to turn on the headlights. In the first position included parking lights, side lights, tail lights and instrument panel lights. The following provisions include headlights (Fig. 1.44).
NOTE Headlights on, if the ignition key is in the ?�ON?�. |
Automatic shut-off lights in the parking lot If you do not turn off the parking lights after stopping, they automatically go off when you open the driver's door. to turn on the parking lights, you must turn on the ignition again.
Outdoor lighting in the daytime (optional) The car can be equipped with lighting in the daytime. This coverage is used to improve the visibility of oncoming traffic. This coverage is designed specifically to work in conditions when the engine is running and the switch headlamps is set to ?�OFF?� (?�Off.").
Switch beam headlights
To enable the high beam headlights push the switch away. At the same time on the instrument panel warning lamp lights turn on high beam. When translating the lever back to the light switches from long to short-range (Fig. 1.45).
Flashing lights
Flashing headlights is carried out with a slight movement of the lever is released and the switch. Flashing headlights may even switch the headlamp is set to ?�OFF?� (?�Off.") (Fig. 1.46).
Automatic activation of external lighting (optional)
| Fig. 1.47. Automatic activation of external lighting
|
To enable automatic outdoor lighting, set the selector at the end of the combination switch to ?�AUTO?�. Depending on the ambient light to be included parking lights, side lights, rear lights, instrument panel lights or headlights (Fig. 1.47).
NOTE The cloudy and rainy weather, with heavy fog, turn on the outside lights manually. Never place any objects on the sensor automatically turn on outdoor lighting, located on the dashboard. Do not clean the sensor using a window cleaner. |
| Fig. 1.48. The sensor automatically turn on outdoor lighting
|
If the vehicle has tinted windscreen, automatic on ambient light may not work correctly (Fig. 1.48).
| 
