 printable version
Cruise control (automatic speed maintenance vehicle) (optional)
Cruise control - a system of automatic control of the speed of the vehicle, which maintains the desired speed without control accelerator pedal. This system is designed to create comfort while driving on motorways. The system operates in the speed range from 40 km / h and above.
NOTE Do not use cruise control when driving around town, winding and slippery roads. |
The inclusion of cruise control
To activate the cruise control, press the switch ?�ON - OFF?�, while the instrument panel indicator lights turn on the cruise control. Accelerate the vehicle to a desired speed above 40 km / h.
| Fig. 1.105. The button ?�SET?� the cruise control
|
After setting the desired vehicle speed, press the switch ?�SET?� (?�COAST?�) (Fig. 1.105). At the same time the instrument panel indicator lights ?�SET?�. Remove your foot from the accelerator and the vehicle speed is automatically maintained. To temporarily zoom into a specific speed, press the accelerator pedal. Once you take your foot off the accelerator pedal, the car will move back to the set speed.
NOTE If the vehicle speed is reduced to 15 km / h or more from the set speed, or is reduced to 40 km / h or less, the cruise control will automatically shut down. |
Turn off cruise control Cruise control can be turned off with one of the following methods. Pressing the switch ?�CANCEL?�. Press the brake pedal. By pressing the clutch pedal (on cars with manual gearbox). Move the lever to position ?�N?� (?�Neutral?�) (for vehicles with automatic transmission). When the vehicle speed decreases to 15 km / h or more from a predetermined speed. When the vehicle speed decreases to 40 km / h or less. When you turn the switch ?�ON - OFF?�.
Resumption of movement at a given speed If the vehicle is moving at a speed of 40 km / h or higher, and before the cruise control was switched off, the previously specified speed can be automatically restored by pressing a switch ?�RESUME (ACCEL)?� (?�Renewal"). While pressing and holding the switch ?�RESUME (ACCEL)?�, the instrument panel indicator lights ?�SET?�.
Increasing the set speed Press and hold the switch ?�RESUME (ACCEL)?� (?�Renewal"). While pressing and holding the switch ?�RESUME (ACCEL)?�, the instrument panel indicator lights ?�SET?�. Increase speed to the desired value, and release the switch ?�RESUME (ACCEL)?� (?�Renewal"). When pressing the switch gradually increases the speed of the car.
Reducing the set speed Press and hold the switch ?�SET (COAST)?�: the car gradually reduces speed. While pressing and holding the switch ?�SET (COAST)?�, the instrument panel indicator lights ?�SET?�. When the vehicle reaches the desired speed, release the switch.
ATTENTION When the cruise control is not in use, the switch ?�ON-OFF?� must be turned off. Use the cruise control only when driving on the highways free and in good weather. Avoid using cruise control when traffic conditions do not allow to move at a constant speed, such as in heavy traffic vehicles, strong wind, on a snowy, icy, wet or slippery roads or over 6% up or down. When using the cruise control system, pay special attention to traffic conditions. If a car with manual transmission at a given speed (in the mode of cruise control) to transfer the shift lever to the neutral position ?�N?�, without using the clutch pedal, the engine speed is excessively increase, which can lead to engine damage. If this happens, depress the clutch pedal or switch off the main switch cruise control. During a given speed (during the cruise control) by pressing the button ?�SET?� (?�installation?�), or when it is pressed again after the brake pedal is depressed cruise control will resume its work in about 3 seconds. This delay is normal. |
| 
