REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Santa FE (2006 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Santa FE
		Operation and maintenance of car
		Engine
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body
			Overview
			Exterior body parts
				Removal and installation of the wing
				Adjustable hood
				Removing and installing rear door
				Removal and installation of components of the front door
				Adjusting the doors
				Adjusting the door lock striker
				Removal and installation of components of the rear passenger door
				Tilt the back door
				Adjust striker tailgate
				Removing and installing the side lining of the roof
				Removing and installing sunroof
				Checking the operational mode after installation
				Adjusting hatch
				Removal and installation of rear-view mirror
				Removing and installing front bumper
				Removing and installing rear bumper
			Tables
		diagrams

printable version

Checking the operational mode after installation

If the glass panel moves slowly, check and adjust.

Make sure the battery is fully charged.

Make sure that the unit did not get the sliding hatch abrasives.

Make sure that when you open the glass panel of the rear panel does not touch the roof. If there are grazing, completely open the glass panel and slide the front.

NOTE

If the stopper is shifted too far, it may cause a malfunction or leak. Make sure that the gap between the glass panel and the roof panel - is not more than 0.3 mm.

Fig. 8.32. Nuts adjustment

Measure the driving force of the motor and adjust the value to 15-25 kg of adjustment nut torque on the motor (Fig. 8.32).

After adjustment, make sure that the fixed nut and lock washer.

« previos page
Removing and installing sunroof

next page »
Adjusting hatch