 printable version
Removal and installation of components of the front door
Withdrawal
| Fig. 8.11. The screw holding the trim door handles
|
| Fig. 8.12. The screws holding the inner door trim
|
Install the puller flap between the bindings and trim guard the door. Disconnect the wires from the front door (Fig. 8.13).
Remove the front door speaker and a vapor barrier (Fig. 8.14).
| Fig. 8.15. The bolts holding the front door glass
|
Lower the glass door and remove the bolts holding the front door glass (Fig. 8.15).
Remove the front door glass of the front door modules (Fig. 8.16). Remove the front glass window of the door.
| Fig. 8.17. Removing the front and rear guide grooves glass front door
|
Remove the front and rear guide grooves glass front door (Fig. 8.17). Remove the stem from the external handle. Remove the screws holding the lock and the door lock actuator.
| Fig. 8.18. Removing the module wiring and front door
|
Setting Installation is the reverse order of removal. When installing a vapor barrier doors, butyl tape should not block the openings of fastening the door trim.
| 
