add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
Engine
Transmission
Chassis
Steering Gear
Brakes
Overview
brake system
Check and adjust the braking system
Checking the brake fluid hydraulic drive braking system
Removal of air from brake system
Check the check valve vacuum hose (brake booster)
Removal and installation of the vacuum hose (brake booster)
Check the brake pedal
Check the height of the brake pedal position
Adjusting the height of the brake pedal position
Check clearance of the brake pedal
Adjustment of a backlash brake pedal
Backlash check pedal-floor
Checking the brake switch signal
Removing and installing brake pedal
Removal and installation of the main brake cylinder
Check the fluid level sensor
Removing and installing brake servo
Check the brake servo
Dismantling and assemblage of the master cylinder
Removing and installing front brake disc
Replacing the front brake pads
Removing and installing rear disk brake
Checking the parking brake system
Removal, check and installation of the rear wheel speed sensor ABS
Removal and installation of the hydraulic unit Anti-lock brake system
Tables
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Adjustment of a backlash brake pedal



Remove the spring pin and a pin with a head and a hole for the pin.

Adjustment of a backlash brake pedal
Fig. 6.16. Adjustment of a backlash brake pedal


Loosen the lock nut D and turn the rod C to align the holes in the yoke and pedals (Fig. 6.16).
Set the pin with a head and an aperture under the pin and spring pin.
Tighten the lock nut D.
The inhaling moment: 15,7-21,6 Nm.
Check the height of the pedals and brake work.




« previos page
Check clearance of the brake pedal
next page »
Backlash check pedal-floor

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.