Disassembly of the steering mechanism and steering rods. Mazda 6 (2002 release)

Disassembly of the steering mechanism and steering rods

ATTENTION

When attaching the steering arm in a vise jaws set on copper plates, place a cloth or similar material.

The components of the steering gear and steering rods

Fig. 5.16. The components of the steering gear and steering gear: 1 - hydraulic piping; 2 - tie rod end; 3 - lock nut; 4 - a collar of a protective cover; 5 - band clamp protective cover; 6 - a protective cover; 7 - Tie Rod; 8 - a washer; 9 - lock nut (adjustment cap); 10 - adjusting cover; 11 - a spring stop rail; 12 - rail fence; 13 - a bolt; 14 - the gear shaft and the housing; 15 - the gear shaft; 16 - a sealing ring; 17 - a lock ring; 18 - a control valve; 19 - O-ring; 20 - the gear shaft; 21 - the valve body; 22 - upper bearing; 23 - gland; 24 - the return line; 25 - the valve body; 26 - the holder; 27 - a sealing ring; 28 - U-shaped seal; 29 - foot ring; 30 - steering rack; 31 - O-ring; 32 - a sealing ring; 33 - gland; 34 - inner rail; 35 - the case of the steering mechanism; 36 - Rubber Bearing

The components of the steering gear and steering gear are shown in Fig. 5.16.