printable version
Eliminating minor scratches
If you scratch the surface and does not affect the metal body panels, its repair is made extremely easy. To remove loose paint particles and wax coating lightly rub the scratched area of fine grinding paste. Rinse the treated area with clean water. Small brush paint scratch paint applied to the outer cover body panels. Continue to put a paint layer by layer as long as the surface scratches inside it reaches the level of the surrounding surface refinishing panel. Give the new paint to polymerize for at least two weeks, then grind the transition surface flush with the rest of the cover panel with very fine grinding paste. Then cover the treated surface with wax. If the scratch has penetrated through the layer of paint to reach the metal body and cause it to corrode, should use a different technology renovation. Penknife from scratch scrape the rust powder, then treat the surface of the corrosion inhibitor to prevent the development of corrosion in the future. Rubber or plastic spatula cover the damaged area inhibitor treated filler. If necessary, and this is particularly useful when shpaklevanii narrow scratches, pastes for forming the fine filler may be diluted with a solvent. Before the plaster hardens within the crack, wrap fingertip smooth cotton cloth. Then, moistened finger in the solvent quickly slide it along the plastered surface scratches. This will make the surface slightly concave. Now, after hardening putty treated scratch can be colored in accordance with the instructions given to cases where the scratch does not affect the metal.
|