 printable version
Remove the bolts freewheel
When removing and installing bolts hold the pressure plate, as shown in Figure 8.91. When installing a new compressor air conditioning system, replace the bolt.
| Fig. 8.92. Remove the sealant from the compressor
|
After removing the stator and the thermal protector completely remove the sealant from the compressor air conditioning system (Fig. 8.92). Before installing, apply about 1 g of silicone sealant (sealant KE-347W or equivalent) to the contact surface of the thermal protection, then gently set it on the compressor air conditioning system, leaving no gaps. When installing a new stator and thermal protection device, replace the screw. When installing a new stator and thermal protection device, replace the clamp.
When installing a new pressure plate, the pulley of the compressor of the air conditioning, the stator and the compressor housing, replace the retaining ring (Fig. 8.93).
| 
