 printable version
Removing faulty wheel
1. If the wheels of the car dust shields are installed, remove the cap using the lug wrench. To do this, click on the edge of the handle cap pointed end of the lug wrench.
2. Loosen the wheel nuts one turn (counterclockwise). Do not remove the nuts completely until then, until the wheel is completely posted (Fig. 1.169).
3. Establish a jack under the reference threshold of a place in the body, closest to the damaged wheel (Fig. 1.170).
ATTENTION It is dangerous to raise the vehicle, if the jack is installed in places that are not specifically provided for this purpose. The vehicle may fall off the jack and seriously injure or even kill is in close proximity to humans. It is dangerous to use a jack that is not designed for your car Mazda. Use only the jack that comes with your car. It is dangerous to raise the vehicle, if the jack is based on any of the pad. Jack may become unstable, and nearby people can be seriously injured or falls car jack. It is forbidden to lay a jack under any foreign objects. |
4. Insert the end of the eyelet screw jack crank handle.
5. Turn the crank handle clockwise to raise the vehicle high enough to install a spare wheel. Before you turn away wheel nuts, make sure that the vehicle is stable and can not fall off the jack or spontaneously budge (Fig. 1.171). 6. Remove the wheel nuts by turning them counterclockwise, and remove the damaged wheel.
| 
