 printable version
Replacement lamps beam headlamps
1. Make sure the main light switch is in the "OFF". 2. Lift the hood and determine the rear side of the headlight housing arrangement of lamps installed in the headlights and driving lights. The lamp is located at the edge belongs to the headlamp beam, and the lamp is located near the center of the car - headlight beam.
4. Lift the air cleaner housing. 5. Press the foot lock, located on top of the sealing cap and remove the cover. 6. Disconnect the electrical connector from the bulb by pulling it back.
8. Pull the spring holder up to release the lamp. 9. Carefully remove the bulb from the socket by pulling it back. 10. Replace the lamp. 11. Install all the parts, perform the above steps in reverse order.
NOTE - After installation, the place of the air cleaner housing, check the connection of an electric socket. - After connecting the electrical connector, insert the electrical harness in the holder on the side of the housing of the air cleaner. - Pack the bulb into the box from the new lamp. Throw overheated lamps out of the reach of children. |
| 
