REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 6 (2002 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	6
		Operation and maintenance of car
			eleven Description of vehicle
			Restraint System
			Car use to destination
				Engine start
				Control manual gearbox
				Control automatic transmission
				The system ESP (cruise control)
					Enable / disable cruise control
					Setting the speed to be stabilized
					Increase the speed to be stabilized
					Reduced rate stabilized
					Switching off the cruise control system
				The traction control system (TCS)
				Protivozanosnaya system (DSC)
				Stabilization of the rear axle
				Hitch
			Troubleshooting arisen in a way or before driving
		Engine
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body

printable version

Setting the speed to be stabilized

1. Turn the cruise control system by pressing the main switch ?�ON / OFF?�.

2. Accelerate the vehicle to the desired speed (at least 30 km / h).

Press and release the ?�SET / COAST?� at the speed of the car, you want to keep. At the same time, release the accelerator pedal.

Do not hold the switch down. Otherwise, if the driver does not press the accelerator pedal, the vehicle speed will fall as long as the button switch is released. At the same time you may miss the desired speed.

NOTE

Feature ?�SET?� set the desired speed can be enabled no earlier than about 2 seconds after pressing the main switch ?�ON / OFF?�. On the steep slope the vehicle can quickly lose speed when driving uphill or quickly get up to speed when driving downhill.

« previos page
Enable / disable cruise control

next page »
Increase the speed to be stabilized