add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 6 (2002 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 6
Home
 
Mazda
6
Operation and maintenance of car
eleven Description of vehicle
Restraint System
Car use to destination
Troubleshooting arisen in a way or before driving
Spare wheel and tool kit
Engine overheating
Vehicle recovery
General information and safety measures for Inspection and maintenance of the car
Lamps lighting devices and light-signaling
Caring for your vehicle and
Corrosion protection
Prevention of corrosion
Washing and waxing paste
Removing stains
Polishing and waxing paste
Repeated application of paste wax
Care bumpers
Cleaning the interior of the car
Cleaning upholstery made of genuine leather (optional)
Carpet cleaning
Cleaning seat belts
Washing windows
Engine
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Washing and waxing paste



Car Wash, when its surface is heated by sunlight, is unacceptable. Always wash your car in the shade.
Wash the car as often as possible. Dirt is abrasive and can scratch the car, if it is not washed off. Polluted air or acid rain can damage the paint in a chemical reaction, if left in contact with the sediment surface of the vehicle. If you live near the sea or in the region (country), where road salt is used or chemicals to take care of the roads, you should pay special attention to the bottom of your car.
In the winter, or after riding on muddy wet thoroughly flush the underbody. to remove layers of dirt and corrosive materials, use a strong jet of water. Use a high-quality shampoo for washing the car and follow the manufacturer's instructions on the packaging. Shampoo can be purchased from an authorized dealer of Hyundai or auto shop. Do not use strong household cleaners, gasoline, solvents or abrasive cleaners as this may damage the paint of the car. Use a clean sponge or cloth, often wetting her, and did not damage the paint too much friction. If the dirt is stuck to, generously spray and gently remove it.
For cleaning the wheels, use a soft brush or moistened with a neutral detergent solution from a rough wool cloth.
To clean the plastic wheel cover, use a clean sponge or soft cloth and water.
Clean aluminum wheels weak neutral detergent solution or a mild detergent. Do not use abrasive cleaners. Protect the exposed metal surface by washing, polishing and applying paste wax. Since aluminum is subject to corrosion, winter aluminum rims, pay attention. When driving on roads covered with salt, wash your rims.
After washing it thoroughly wipe. Once dry, soapy water reserves in the paint stains.
When the warm weather and low humidity you may need to wipe every detail immediately after washing the car, not to leave stains on the paint.
After wiping, wipe the car dry. It is necessary to remove water from the paintwork so that it does not remain on the spot. Do not rub hard, it can damage the paint.
Upon detection of dents or scratches on the paintwork covering their repair paint to prevent the occurrence of corrosion. To protect the paint from corrosion, you should wash your car at least once a month. Pay special attention to removing salt, dirt and other substances out of the wings of the car. Make sure the drain holes are free. Paintwork damage can be caused by patches of tar, industrial emissions, and charcoal remains of insects, if they are not to be removed immediately. If plain water is not effective enough to remove the accumulated dirt, use neutral solutions for the car wash. To remove a solution after washing necessarily wipe the car. Avoid drying solution on the paintwork.




« previos page
Prevention of corrosion
next page »
Removing stains

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.