printable version
Backdoor
Withdrawal Disconnect the negative battery terminal. Open the back door and set it under the fence. Put protective pads on the edges of the rear door opening to protect painted surfaces from damage. Place a clean cloth under the upper corners of the rear doors, to protect the paintwork of the car when it is removed. Marker, mark the position of the rear door hinges.
| Fig. 12.2. Location of the back door 1 - the mechanism unlocking the back door; 2 - rear door; 3 - seal; 4 - loop; 5 - trim panel; 6 - shock plate; 7 - lock; 8 - drive cable lock the back door; 9 - emphasis tailgate
|
Disconnect all wiring harnesses, which can interfere with the removal of the rear door. Remove the bolts fastening loops and an assistant, remove the rear door.
Setting Place the back door so that the position of the hinges coincide with the labels put before removal of the door. Screw hinge bolts and rack and tighten them. Connect all the wiring harnesses.
Adjustment
| Fig. 12.3. The direction of movement when adjusting the loop back door
|
| Fig. 12.4. The direction of movement when adjusting the shock plate tailgate
|
The position loop and impact plate can be adjusted after loosening the bolts and nuts of the shock plate hinge on the body (Fig. 12.3, 12.4). To access the nuts hinge lever carefully lift the door trim panel and headliner and moving the door, adjust its position.
Focus rear door Fully open the rear door. Remove the nut securing the fence to the back door. Remove the lower bolts securing the emphasis on the body, and remove the door. Installation is performed in reverse order of removal.
|