 printable version
Checking the status of the release of gases otrabotavshih
The exhaust manifold is firmly connected to the muffler using bolts and nuts. Under the bottom muffler is held in suspension of solid rubber.
The sequence of operation |
"30,000 km every year"
| Fig. 4.100. Rubber suspension muffler
|
1. Check all rubber suspension parts muffler (Fig. 4.100) on the breaks, cuts or other damage, replace if necessary. To check the exhaust pipes on hangers gently pull down. 2. Check the strength bolting flange silencer. 3. Rag plug the outlet end of the muffler. The engine must soon die. If you hear a rustling sound and the engine continues to run, the exhaust system is not in order. 4. It is very loud and crashing while driving indicates a rusted muffler.
| Fig. 4.101. Elastic connection before silencer
|
5. Check for wear elastic connection to the muffler (Fig. 4.101). 6. Carefully prostuchite entire exhaust system from the manifold with a hammer. If the sound of a bell struck with a hammer, the metal is in order. If in some places, the sound muffled - these places are susceptible to corrosion and may soon rust.
| 
