add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz E-Class

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz E-class
Home
 
Mercedes-Benz
E-class
Introduction
Description of the model Mercedes E-Class
Working conditions and tools
Car Care
Diesel engines
Petrol engines
Transmission
Chassis
The brake system
Electrical
Shop
Body
Installing the hood in a vertical position
Removing the hood
Adjustable hood
Removing the grille
Removing the logo ?�Mercedes?�
Replacing the cable opening hood
Removing Wing
Removal Lockers
Removing the lid
Removing the side plates
Bumpers
Removing the rear-view mirror
Door
The windscreen and rear window
Sunroof
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Body







This important element of high requirements: low weight, torsional stiffness, high strength, the presence of energy-absorbing zones front and rear.
Body car E-class carrier. The bottom, sides, roof and rear wings are interconnected by welding. The windscreen and rear window are glued to the body. At the T-model (wagon) and glued the rear side windows.
Independent body repair
Most repair operations described in the section, you can do yourself if there is a standard set of tools. At a certain dexterity bumpers, front fenders and front of the body can be removed one. The heavy parts such as the bonnet, boot lid (rear door) and doors is better to shoot with the assistant. Practical advice: if before removing the hood and trunk lid hinges felt-tip pen mark the position, the subsequent installation of these elements will be simplified significantly.

PRACTICAL ADVICE
The consequences of accidents
When the body is damaged in an accident is your fault, you can significantly save on repairs, if you try to perform most of the work yourself. Suppose that damaged bumper, headlight, turn signal, fender, hood and radiator.
It is necessary to dismantle the damaged items and to prepare the car for repairs in the body shop. Its task will be straightening of bent sheet metal components, the new welding and painting. The assembly you will again take over.
When replacing the front fenders, doors, hood and trunk lid must be reserved a sufficient amount of anti-corrosion agents. After painting all the holes must be filled with liquid wax. To protect the welded seams and joints of small universal use sealant. Means for underbody protection can be applied to joints in multiple layers.
After the accident, inspection gaps body will assess whether the broken body geometry.




« previos page
Removing the upholstery in the area of the pedal assembly
next page »
Installing the hood in a vertical position

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.